 |
TAGSYS Medio L400 HF Reader
With breakthrough sensor technology and self diagnostic capability, the L400 is the industry's first self correcting intelligent RFID reader. The L400 can be remotely managed and administered to ensure you get the highest levels of performance from your RFID infrastructure. Designed as a network device, the L400 conserves critical network bandwidth by filtering data to remove redundancies before transmitting to enterprise systems
Communication Interfaces: Ethernet, RS232 & USB
Protocols: NXP ICODE 1, ISO 15693, ISO 18000-3 Mode 1 (including custom
commands for SLI, SLI-S, SLI-L) NXP ICODE ePC & UID-OTP (C440), firmware
upgradeable to ePC HF Gen2
RF Channels: 2 (L400-2) or 4 (L400-4)
RF Output Power: Variable (up to 5W)
General Purpose Input / Output: 4 Input, 4 Output
click here for a data sheet
|
 |
TAGSYS Medio L100 / L200 HF Reader
The TAGSYS Medio L100 & L200 are multi protocol long-range HF RFID readers featuring innovative technologies and designed for applications where 3D and volume detection is required. They are ideal for use in industrial applications where high numbers of items need to be identified simultaneously
Communication Interfaces: RS232 / RS422 / RS485 & USB
Protocols: TAGSYS C210, NXP ICODE 1 (C270), ISO 15693, ISO 18000-3 Mode 1
(including proprietary commands for SLI, SLI-S, SLI-L chips)
RF Channels: 2 (L100-2) or 4 (L200-4)
RF Output Power: L100 up to 4W, L200 up to 7W
General Purpose Input / Output: 4 Input, 4 Output
click here for a data sheet
|
 |
TAGSYS Medio L-P101 HF Reader
TAGSYS Medio L-P101 reader is a low cost, multi protocol, mid range HF RFID reader designed specifically for use in libraries. Its small size and USB communication interface ensures a seamless integration with existing library infrastructures. The LP-101 is optimized to facilitate the check in / check out of multiple library items at once.
Communication Interfaces: USB
Protocols: C220, C320, ISO 15693 / ISO 18000-3 Mode 1
RF Channels: 1
RF Output Power: 1W
General Purpose Input / Output: 1 Input, 1 Output
click here for a data sheet
|
 |
USB RFID Pen Reader EM4102
Intelligent pen reader module, provides all RF and control functions to communicate
with EM4100 / 4102 and compatible transponders
Operating Frequency: 125Khz
Power Consumption: 5v I<50ma
Operating Distance: to 3cm with EM4100 (optimal conditions)
Data Bytes: 10 ASCII data characters
Response Time: Less than 0.1 second (LED flashes to confirm read)
Operating Temperature: 0 - 55°C
Storage: -25°C - 65°C
Humidity: 5-95%RH non-dew
Dimensions: 70mm x 20mm x 9.8mm
Weight: 18g
|
 |
M3 Mobile 7510S with 13.56Mhz HF RFID
Highly versatile rugged hand held, Windows Mobile. 13.56Mhz HF RFID scanner
IP64 rating for dust & water protection
Can withstand 1.5 metre multiple drops to concrete
3.5" 240 x 320 Colour TFT LCD screen
Mini SD slot, USB & RS232 interfaces
Intel Xscale PXA-270 520Mhz processor
128MB RAM / 128MB Flash ROM
Optional extras for the M3
2.0 M Pixel colour camera with flash
IEEE 802.1b/g wireless lan
GPS satellite module, 15 x 15 active antenna
Bluetooth module
Barcode scanner
3G+ HSDPA, GSM, GPRS, Edge Quad Band
|
 |
Psion Workabout Pro with 13.56Mhz HF RFID
Rugged flexible hand held running Windows Mobile. With 13.56Mhz RFID inbuilt
IP54 rating for dust & water protection
Can withstand 4ft (1.1m) multiple drops to concrete
¼ VGA Daylight readable touch screen
Compact flash & SD/MMC memory expansion ports
USB connection, 100 pin expansion interface
Available in short or long keyboard configuration
|
 |
HP iPaq Pocket PC 214 with CF 13.56Mhz RFID
Versatile low cost RFID reader. With 13.56Mhz CF card installed
Windows Mobile 6
PXA310 624Mhz
128MB RAM
256MB ROM
4" TFT colour screen
802.11b/g Wireless |
|
Passive RFID 
